How To Jump On A Skateboard? Guide For Beginners

The way to jump on the skateboard was invented in 1977. It quickly became one of the most important and popular movements on skateboarding. This trick can help riders jump in the air and carry their boards. So how to jump on a skateboard? This article is a guide for beginners to jump on a skateboard.

Instruction about jump on a skateboard.

Jump on a skateboard is called ollie. Here’s a trick that will help you jump up with your skateboard while skateboarding. At first sight, you may find it is very hard to do this movement. Perhaps jump on a skateboard is the foundation for many other skateboarding tricks you need to master.

Ollie was first performed on a halfpipe skateboard by a figure skater named Alan “Ollie” Gelfand. It happened in 1977 when he started crashing heavily on the rear on a ramp. This movement created consecutive seams and allowed the player to jump into the air without using his hands.

Several years later, there are many rumors that another skateboarder was also performing ollie on the flat ground. Due to the extensive development of the way to jump on a skateboard, skateboarding has become much more interesting. And it is also the premise for thousands of other tricks to be born.

It was Ollie who was mainly responsible for making skateboard jumping tricks so popular today. So, this trick was named after his nickname for the memorization of this sportsman. To do it proficiently, you must first consult the theory of this movement carefully. When practicing it is necessary to ensure a balance to proceed successfully.

How To Jump On A Skateboard? Guide For Beginners

In general, the jumping method on a skateboard is also relatively simple. However, you need to make sure you understand how to perform Ollie from the most basic techniques to the complex. Here are the processes of jumping on a board:

1.Basic knowledge about “How to jupm on a skateboard?”

First of all, you should do Ollie from simple movements in the beginning. Accordingly, you should practice Ollie on the static board and then advanced exercises on the moving board. This method will bring a great effect than when you start with the difficult movements.

Jumping on the static skateboard is conducted through the following steps:

• Step 1: Find a suitable location to practice jupm on a skateboard

To getting started, you should find out a flat space to practice this trick. Since this is the first time you practice this movement, so make sure the place you choose does not have steep terrain. It is completely balanced and does not make the board move on its own.

If you want to be safer, you can choose a lawn or a carpeted training field to make sure not to worry about falling during the practice.

• Step 2: Locate your feet on the board

First, get on the board with the most comfortable posture. Then, you put your forefoot in the middle of the skateboard. Your hindfoot is on the rear of your board.

Your forefoot should rest completely on the skateboard. The shadow of your back foot should be aligned with the center of the skateboard. It means that the heel will likely protrude from the board.

Make sure both feet are facing straight forward.

• Step 3: Bend the knees

You need to bend your knees to be able to turn the rear of the board and jump. At the same time, lift your legs back to balance the board at a moderate height.

• Step 4: Use the hindfoot to press the rear of the skateboard

The downward force you apply to the rear of the skateboard will cause it to touch the ground. It creates an upward force when the board bounces off.

Be careful not to press too hard on the rear of the board. Because if you use strong force, your weight will prevent the board from going up in the air.

• Step 5: Jump up

Immediately after using your hindfoot to press the rear of the board, you should straighten your legs to jump into the air.

• Step 6: Drop slowly

Once you have jumped into the air, extend your legs as you drop your body onto the ground. Extending your legs helps you reduce the amount of force exerted on your body when landing.

• Step7: Drop and balance

Drop comfortably with bent knees and both feet on the skateboard. It will help you to keep your balance better on the board.

At the same time, keeping your knees bent is an important thing to avoid knee injuries and keep control of the skateboard.

• Step 8: Grounding

You should land on all 4 wheels of the board at the same time and use both feet. Then you roll the wheel lightly.

2. Advanced

Once you’ve mastered the basic movements, you can try a little more advanced movements to make your performance look more impressive. The premise for these advanced maneuvers is to perform ollie while the skateboard is in motion.

You can proceed through the following steps:

• Step 1: Start rolling

To successfully jump on a board, you first need to let your skateboard roll at the most comfortable speed.

You put your feet in the same basic posture as on the static skateboard.

• Step 2: Lower your body

Lower your body and keep your center of gravity lower will allow for a more dramatic jump. It also helps you to control the movement better.

You should remember that never tilt your hips or tilt your shoulders forward. Moreover, you try to keep a balanced center of gravity between your feet to stay in control.

• Step 3: Raise your arms

You try to raise your arms decisively and quickly as you make the jump to increase the upward force.

• Step 4: Get your knees up

To make your jump more dramatic, pull both knees up to your chest as high as possible. You can only do this movement when you reach the high point of the jump and balance the board in this position.

• Step 5: Grounding

Continue rolling the wheels when you land. This process can happen by itself thanks to your forward force that will keep moving when the skateboard hits the ground.

If you don’t want to spend too much practice time, you should remember some notes. You only perform this advanced trick when you have mastered the basic principles. It is the most important step to success and limit some accidents during the implementation process.

Fix the basic problems when jumping on a skateboard

• It is difficult to determine the right force to act on the rear of the board to make it bounce into the air. Accordingly, you should press down with enough force and quick speed, or you can also try with many different forces to be able to find the right level.
• Another equally difficult is pulling the board upwards with you as you jump on a skateboard and also keep it in the direction you want. To overcome this challenge, you should relax in the ankle. To keep control, you must apply friction between the edge of the shoe and the board when performing this movement. It will bring your feet to the front edge of the board and pull them up easily.
• Another challenge of jumping on a skateboard is ensuring a quick response. To ensure detailed and timely performance, you should directly consult the slow-speed video tutorials to get the most meticulous and detailed observations.
• Finally, landing without leaving the skateboard is also one of the important steps. The key factor is to keep your knees bent while you land. But ideally, you should land on all four wheels at the same time, while keeping your shoulders are equal throughout the process.

“How to jump on a skateboard? Guide for beginners” along with some popular problems and their solutions is the main point of this article. Hopefully, it was able to provide you with useful information to implement well. Remember, Ollie in skateboarding requires you to go from simple to complex, basic to advanced to the right technique, and you should also practice hard every day. Good luck!